Can Design Protection Extend Beyond Physical Products? The Evolving Recognition of GUIs and Digital Interfaces under Indian Law
Authored by Srinithi Thangavelu
Introduction
Industrial design protection has traditionally focused on the visual appearance of tangible products. However, with the rapid digitalisation of consumer technology, products are increasingly distinguished not only by their physical form but also by their Graphical User Interfaces (GUIs), icons, screen displays and other digital visual features. This shift raises an important question: can design protection under Indian law extend beyond physical products to encompass digital interfaces displayed on electronic screens?
The answer is not self-evident under the Designs Act, 2000 (the “Act”), which requires a design to be applied to an “article” through an “industrial process” and to appeal solely to the eye. The issue gained prominence in NEC Corporation v. The Controller of Patents and Designs & Anr.,[1] where the Calcutta High Court examined whether GUIs could fall within the existing framework of design protection. Against this backdrop, this article analyses the statutory framework, the Court’s reasoning in NEC Corporation, and reviews the proposed Draft Guidelines relating to GUIs and icons and considers the practical implications for applicants seeking protection for digital interfaces.
Understanding the Statutory Framework
The registration of industrial designs in India is governed by the Designs Act, 2000, read with the Designs Rules, 2001:
- Section 2(a) defines an “article” to mean any article of manufacture and any substance, artificial or partly artificial and partly natural; and includes any part of an article capable of being made and sold separately.
- Section 2(d), in turn, defines a “design” as only the features of shape, configuration, pattern, ornament or composition of lines or colours applied to any article whether in two dimensional or three dimensional or in both forms, by any industrial process or means, whether manual, mechanical or chemical, separate or combined, which in the finished article appeal to and are judged solely by the eye; but does not include any mode or principle of construction or anything which is in substance a mere mechanical device, and does not include any trade mark as defined in clause (v) of sub-section (1) of section 2 of the Trade and Merchandise Marks Act, 1958 (43 of 1958) or property mark as defined in section 479 of the Indian Penal Code (45 of 1860) or any artistic work as defined in clause (c) of section 2 of the Copyright Act, 1957 (14 of 1957).
The definition is not unlimited. It expressly excludes, among other things, mere mechanical devices, trademarks, property marks and more specifically, artistic works protected under the Copyright Act, 1957. In addition, Section 4 bars the registration of designs that are not new or original, have previously been disclosed to the public, are not significantly distinguishable from known designs, or contain scandalous or obscene matter.
Accordingly, while the Act provides the foundational requirements for design protection, its application to digital interfaces has not always been straightforward. Questions arose as to whether a GUI could be regarded as a design applied to an “article”, whether its generation through electronic means satisfied the requirement of an “industrial process”, and whether an interface visible only upon activation of a device could qualify for protection under the Act. These interpretative issues subsequently came before the Calcutta High Court for judicial consideration.
Judicial Recognition of Graphical User Interfaces
The uncertainty surrounding the application of the Act to digital interfaces was addressed by the Calcutta High Court in a batch of appeals involving NEC Corporation, ERBE Elektromedizin GmbH, Abiomed Inc. and TVS Motor Company Limited. The applications had been rejected by the Designs Office on grounds including that a GUI was not an article in itself, was not applied through an industrial process and lacked permanence because it became visible only when the electronic device was switched on. The Controller also questioned whether such subject matter was more appropriately protected under copyright law.
In examining these objections, the Court adopted a purposive interpretation of Sections 2(a) and 2(d) of the Act. It observed that the expression “article of manufacture” should not be restricted to conventional physical products and that the design itself need not constitute the article. Rather, the design and the article to which it is applied are distinct concepts. In the context of a GUI, the relevant article may be the display unit or the finished product incorporating the display, such as a smartphone, tablet or automobile dashboard.
The Court also rejected the narrow interpretation of the expression “industrial process”. It recognised that a GUI is generated through electronic signals and rendered through hardware, and that such technological processes can fall within the broad statutory expression. The Court emphasised that legislation must be interpreted in a manner that accommodates relevant technological developments, rather than being confined to the methods and processes prevalent when the legislation was enacted.
The Court also considered the issue of visibility and permanence of a GUI. The Court clarified that the Designs Act does not require a design to remain permanently visible or physically affixed to an article. Nor does it prescribe a tactile requirement. The relevant consideration is whether the design becomes visually perceptible when the article is put to its intended or normal use. Therefore, a GUI does not become ineligible merely because it is displayed only when a device is switched on.
The Court further distinguished the functional operation of an interface from its aesthetic appearance. Although GUIs may contain functional elements such as buttons, menus and navigation icons, their arrangement, spacing, proportions, colour combinations and overall graphical presentation may involve independent visual choices. Where the appearance is dictated solely by function, the statutory exclusion may apply. However, the presence of functional components does not, by itself, justify rejecting the entire interface without examining its visual characteristics.
The Court consequently held that GUIs are not excluded from registration as a category and that their eligibility must be assessed on a case-by-case basis. Importantly, the appeals were allowed, the impugned orders were set aside, and the matters were remanded to the Controller for fresh consideration. While the judgment did not direct the automatic registration of the applications, it significantly clarified the interpretation of the statutory requirements applicable to GUIs and digital interfaces. In doing so, it laid the foundation for a more structured examination framework, thereby prompting further guidance from the Designs Office on the registration and classification of such subject matter.
Draft GUI Guidelines and Classification
The Calcutta High Court’s decision in NEC Corporation brought renewed attention to the registrability and growing recognition of GUIs as potential subjects of design protection. In this context, the Office of the Controller General of Patents, Designs and Trade Marks published the Draft Guidelines for Registration of Designs relating to GUI and Icon etc. on 1st October 2026, inviting comments and suggestions from stakeholders and the comments window closed on 31st October 2026 and now the final guidelines are awaited. The Draft Guidelines seek to provide practical guidance on the filing, examination and classification of GUI-related applications within the existing statutory framework. Importantly, they are draft guidance and should not be treated as an amendment to the Designs Act or as independently enlarging the scope of registrable subject matter.
A central requirement under the proposed Guidelines is that a GUI or icon must be associated with an identifiable article, such as a smartphone, tablet, computer monitor or smartwatch. An interface presented in isolation, without identifying the article to which it is applied, would not satisfy the proposed approach. The Guidelines also clarify that the interface should be visually perceptible during normal use, while visibility only upon activation, temporary display or its non-tactile nature should not, by themselves, adversely affect registrability.
The Locarno Classification, adopted under Rule 10 of the Designs Rules, 2001, provides the framework for classifying industrial designs. Under the proposed Draft Guidelines, the appropriate classification is determined by the nature of the novelty claimed in the design. Where the novelty is confined to the GUI or screen display, Class 14-04 may be adopted, notwithstanding that the interface is displayed on an article falling under a different class. However, where the novelty primarily relates to the physical article, the application may be classified under the relevant class corresponding to that article. Where independent novelty exists in both the GUI and the physical article, separate applications may be considered for each. It is, however, pertinent to note that classification under the Locarno system is primarily administrative and does not, in itself, confer registrability, the subject matter must independently satisfy the requirements prescribed under the Designs Act, 2000.
The proposed Guidelines further clarify that surface patterns and ornamentation must be classified according to the article to which they are applied, wherever the article is identifiable and falls within a specific class-subclass. Thus, a decorative pattern applied to textile fabric should be classified under the relevant textile article class rather than automatically being placed under the generic Class 32-01.
Practical Considerations: Filing a Smartphone GUI Application
Consider a company that develops a smartphone with a distinctive home-screen interface comprising a particular arrangement of icons, menus, colour combinations and graphical elements. If the company intends to protect the visual appearance of the interface rather than the physical configuration of the phone, the application may be titled “Mobile Phone with Graphical User Interface”, with Class 14-04 considered where the novelty resides solely in the GUI.
The representations should clearly depict the interface as displayed on the smartphone. The features for which protection is claimed should be shown distinctly, while portions of the device that are not part of the claimed design may be represented in broken lines, accompanied by an appropriate disclaimer. The statement of novelty should identify the visual features in which novelty is claimed.
The application must also comply with the applicable requirements under the Designs Rules, 2001, including Rule 11 concerning the application, Rule 12 concerning the statement of novelty and Rule 14 concerning representations. Where the physical configuration of the smartphone also possesses independent novelty, a separate application under the relevant article class may be considered. For dynamic or animated interfaces, the Draft Guidelines contemplate representations of the relevant frames as separate designs. Applicants should therefore identify the particular visual states for which protection is sought rather than assume that a single static representation will necessarily protect the entire animation or transition.
Conclusion
The growing prominence of GUIs, icons and other digital visual elements has raised important questions regarding the applicability of the Designs Act, 2000 to digital interfaces. In NEC Corporation v. The Controller of Patents and Designs, the Calcutta High Court addressed these concerns by recognising that GUIs are not excluded from design protection merely because they are electronically generated or visible only when a device is in use.
The proposed Draft Guidelines build upon this judicial recognition by providing practical guidance on the examination and classification of GUI-related applications. The combined effect of the statutory framework, the Calcutta High Court’s interpretation in NEC Corporation and the proposed Draft Guidelines indicates that Indian design law is gradually moving beyond a purely physical conception of design protection.
[1] NEC Corporation v. The Controller of Patents and Designs & Anr., IPDAID/22/2024, Calcutta High Court, 9 March 2026 (2026:CHC:0869)